Products
Twelve categories. One accountable supplier.
Pipeline and industrial components matched to pressure class, material grade and standard before they reach your site. Browse the categories below, or send a line list and we'll quote it against spec.
Pipeline Installation Equipment
Tools and components for laying, joining and commissioning pipe.
View details →Industrial Valves & Fittings
Gate, globe, ball, check and butterfly valves with matched fittings.
View details →Flow Control Solutions
Regulation, isolation and control components for process lines.
View details →Pipe Support Systems
Supports, hangers, clamps and guides for pipe routing.
View details →Corrosion Protection Solutions
Coatings, wraps and cathodic protection components.
View details →Mechanical Components
Seals, gaskets, couplings and rotating-equipment spares.
View details →Industrial Fasteners
Studs, bolts, nuts and washers in project-grade materials.
View details →Inspection Equipment
Measurement and verification tools for QA and maintenance.
View details →Safety Equipment
PPE and site safety hardware to HSE requirements.
View details →Maintenance Materials
Consumables and spares for routine and corrective work.
View details →Engineering Consumables
Welding, sealing and fabrication consumables.
View details →Water Infrastructure Components
Valves, fittings and fixtures for water treatment and distribution.
View details →Category 01
Pipeline Installation Equipment
Everything needed to lay, align, join and commission pipe — from field bending and alignment through to hydrotesting. Supplied to the class and schedule your line demands, so crews aren't held up waiting on the one component that doesn't fit.
Request a quoteApplications
- New pipeline construction and tie-ins
- Cross-country and in-plant pipe laying
- Spool fabrication and field joints
- Commissioning and hydrostatic testing
Technical features
- Alignment clamps and line-up tools for a range of diameters
- Pipe bending and end-preparation equipment
- Purging, pigging and hydrotest accessories
- Traceable materials with certification on request
Advantages
- Matched to pipe schedule and material grade before dispatch
- Consolidated supply reduces multi-vendor coordination
- Field-ready condition, verified before it leaves the store
Industries served
Category 02
Industrial Valves & Fittings
Isolation, regulation and non-return valves with matched flanges, fittings and gaskets, selected for the pressure class, temperature and media of your service. We check the spec against the datasheet before quoting — not after the valve fails inspection.
Request a quoteApplications
- Process isolation and flow regulation
- Emergency shutdown and blowdown systems
- Manifolds, headers and skid packages
- Utility and instrument air lines
Technical features
- Gate, globe, ball, check and butterfly valves
- Flanged, threaded, welded and wafer connections
- Body and trim materials matched to service (CS, SS, alloy)
- Ratings to API, ASME and DIN standards
Advantages
- Pressure class and material grade confirmed per line
- Full valve/fitting/gasket sets from one supplier
- Certification and test reports supplied as standard
Industries served
Category 03
Flow Control Solutions
Components that regulate, throttle and protect process flow — control valves, regulators, strainers and relief devices — specified around your operating envelope and control philosophy. The goal is a line that holds setpoint and stays safe under upset conditions.
Request a quoteApplications
- Pressure and flow regulation on process lines
- Overpressure protection and relief
- Strainer and filtration points
- Instrument and control loops
Technical features
- Control valves with pneumatic or electric actuation
- Pressure and flow regulators
- Y-type and basket strainers
- Relief and safety valves rated to standard
Advantages
- Sized to your flow and pressure requirements
- Compatible with existing control and actuation
- Relief and protection devices to recognised codes
Industries served
Category 04
Pipe Support Systems
Supports, hangers, guides and clamps that carry, restrain and route pipe through its thermal and dynamic loads. Selected against the pipe schedule and support spacing so lines stay aligned and stress stays within allowable limits.
Request a quoteApplications
- Above-ground pipe routing and racking
- Thermal expansion and vibration control
- Structural pipe restraint
- Hot and cold service support
Technical features
- Pipe clamps, shoes, guides and anchors
- Variable and constant spring hangers
- U-bolts, saddles and base supports
- Hot-dip galvanised and coated finishes
Advantages
- Matched to pipe size, load and movement
- Corrosion-protected finishes for the environment
- Standard and engineered supports available
Industries served
Category 05
Corrosion Protection Solutions
Coatings, wraps, tapes and cathodic-protection components that keep pipe and equipment out of the corrosion cycle. Chosen for the soil, media or atmosphere the asset actually sits in, because the wrong system is worse than none.
Request a quoteApplications
- Buried and submerged pipeline protection
- Field joint and weld coating
- Atmospheric corrosion control
- Cathodic protection systems
Technical features
- Cold-applied tapes and wrapping systems
- Field joint coatings and primers
- Anodes and cathodic protection components
- Inspection and holiday-detection compatibility
Advantages
- Systems matched to exposure and service life
- Field-applied and factory options
- Compatible with existing CP schemes
Industries served
Category 06
Mechanical Components
Seals, gaskets, couplings and rotating-equipment spares that keep mechanical assemblies tight and turning. Supplied to the material and dimensional spec your equipment requires, with the documentation to prove it.
Request a quoteApplications
- Sealing on flanges, pumps and vessels
- Shaft coupling and power transmission
- Rotating-equipment maintenance
- Mechanical assembly and repair
Technical features
- Spiral-wound, ring-joint and sheet gaskets
- Mechanical seals and gland packing
- Flexible and rigid couplings
- Bearings and rotating-equipment spares
Advantages
- Materials matched to media, temperature and pressure
- Dimensional accuracy verified
- Common and specialist items sourced together
Industries served
Category 07
Industrial Fasteners
Studs, bolts, nuts and washers in the material grades and coatings that pressure joints and structures demand. Because a flange is only as good as the bolting that holds it — and inspection will check the certs.
Request a quoteApplications
- Flanged joint bolting
- Structural steel connections
- High-temperature and high-pressure service
- Coated fasteners for corrosive environments
Technical features
- Stud bolts, hex bolts, nuts and washers
- ASTM/ASME material grades
- PTFE, zinc and hot-dip coatings
- Material test reports on request
Advantages
- Project-grade materials with certification
- Coatings matched to the environment
- Full bolting sets supplied to spec
Industries served
Category 08
Inspection Equipment
Measurement and verification tools for quality assurance and maintenance — the instruments that confirm a component or weld is fit before it goes into service. Supplied calibrated where required, with the paperwork to support it.
Request a quoteApplications
- Dimensional and thickness inspection
- Weld and coating verification
- Preventive maintenance checks
- Quality assurance and handover
Technical features
- Thickness and coating gauges
- Pressure and calibration equipment
- Dimensional measurement tools
- Inspection consumables and accessories
Advantages
- Instruments suited to field and workshop use
- Calibration support available
- Selected for the standard being verified against
Industries served
Category 09
Safety Equipment
PPE and site safety hardware supplied to the HSE requirements your permit-to-work systems demand. Correct specification matters here more than anywhere — this is the equipment standing between people and the hazard.
Request a quoteApplications
- Personal protective equipment
- Confined-space and height work
- Site safety and access control
- Emergency and rescue readiness
Technical features
- Head, eye, hand and respiratory protection
- Fall-arrest and confined-space equipment
- Gas detection and monitoring accessories
- Signage, barriers and access hardware
Advantages
- Specified to recognised safety standards
- Consolidated PPE and site-safety supply
- Suited to hazardous-area requirements
Industries served
Category 10
Maintenance Materials
Consumables and spares for routine and corrective maintenance — the fast-moving items that keep planned work on schedule and unplanned work short. Held and supplied so a maintenance window isn't spent waiting on a part.
Request a quoteApplications
- Planned and preventive maintenance
- Corrective and breakdown repair
- Shutdown and turnaround support
- General plant upkeep
Technical features
- Lubricants, sealants and adhesives
- Cleaning and surface-preparation materials
- Common wear parts and spares
- General maintenance consumables
Advantages
- Fast-moving items available when needed
- Consolidated maintenance supply
- Matched to your equipment and spec
Industries served
Category 11
Engineering Consumables
Welding, sealing and fabrication consumables selected for the base materials and procedures your work follows. The right consumable to the right WPS, so joints pass inspection first time.
Request a quoteApplications
- Welding and fabrication
- Sealing and jointing
- Surface preparation
- On-site construction work
Technical features
- Welding electrodes, wire and gases
- Sealing and jointing compounds
- Abrasives and preparation materials
- Fabrication consumables and accessories
Advantages
- Matched to base material and procedure
- Certified consumables where required
- Supplied alongside related equipment
Industries served
Category 12
Water Infrastructure Components
Valves, fittings and fixtures for water treatment and distribution — corrosion-protected and specified for potable, process or wastewater service. Built to keep water infrastructure running and compliant.
Request a quoteApplications
- Water treatment plant piping
- Distribution and transmission mains
- Pumping stations and reservoirs
- Wastewater and process water systems
Technical features
- Water-service valves and fittings
- Corrosion-protected pipe and components
- Flow-control and metering accessories
- Fixtures for treatment and distribution
Advantages
- Corrosion protection matched to water service
- Components suited to potable and process use
- Consolidated supply for water projects
Industries served
Don't see the exact item?
If it holds pressure or controls flow, we can likely source it. Send the spec and we'll come back with availability and lead time.
Request a quote